This will be a Quick Little Tut on how I used an Oatmeal Box as my Ink Stamp Holder. It Holds 10 Inks in the end and doesn't take up too much room in my space and Most supplies you should have on hand so this is going to cost very little just your time.
You will need
Scissors or exacto Blade
Tape or Glue (I used Tape) You could use a glue Gun if you want to too.
Thick Card Stock 1 sheet 12 by 12 or Scraps if you have
1.Cut 9 Pieces of THICK cardstock any color you like into 3.5 by 3.5 Inch Squares
(About 9 Centimeters)
2.Fold over 1/4 inch on 2 of the outer opposite sides down, creating a flap
For the Box
1. Measure every 2 centimeters and Draw a line Across the box
I left the edges of the box on just folded them inside and Taped them down.
2. Cut out the Lines you'll notice I'm not that straight exactly this does have some
forgiveness when creating it just cut right to one back end and a little bigger then the paper
you will be using as the dividers (they slide in easier this way)
3. Slide the folded edges through each hole and tape it down
Keep the paper bends going all one way to add extra support
4. Now your box is done
Slide your inks in and enjoy
I Just taped together 2 other boxes and then wraped the whole thing
in craft paper to make it one unit
the little slide in boxes are made the same way as the ink shelves just
less shelves and 5 little cardstock boxes slide in :)
If you make one please let me know so I can see how you decorated your's up